20181228_063819
20181228_06275820181228_06381920181228_06383020181228_063840

2019 F450 4X2 Versalift SST36NE Aerial Bucket

$83,816.00

Categories: , Tags: ,

Product Description

*******NEXT AVAILABLE SEPTEMBER!!!!!!**********

RTG S-11264

 

1) VERSALIFT SST-36-NE a non-insulated, end mounted 35 ft. 6 in. (10.8 m) telescopic articulating aerial platform lift, 40 ft. 6 in. (12.3 m) working height including the following standard and optional features:

-Standard platform capacity of 350 lbs. (158.7 kg).

-Upper controls consist of a series of spring loaded toggle switches and a master control switch.

-Engine start/stop system with controls at platform and remote handheld lower controls.

-370° non-continuous rotation with a mechanical stop.

-Open center hydraulic system operates at 1.5 to 2 GPM (6-8 LPM) at 2000 psi (140 kg/cmۜ)

-External hydraulic oil reservoir with 6 gal. (23 l) capacity.

-Outer boom consists of a 6 in. X 8 in. (150 mm x 200 mm) steel section

-5 in. X 7 In. (130 mm x 180 mm) rectangular aluminum inner boom is housed within the outer boom.

-End mounted walk in 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform.

-Manual rotator for platform.

-Master/slave hydraulic leveling with upper control to tilt for cleanout or rescue.

-Non‑lube bearings used at all pivot points.

-Multi‑link hose carrier system through booms.

-Rubberized boom cradle

-12 volt DC backup pump providing power to all boom functions.

-Mounting hardware for chassis/cab installation.

-Handheld remote lower control with series of spring loaded toggle switches and control selector switch

-GFCI receptacle for 120 volt power at platform

-Full body harness and lanyard.

-Painted standard white urethane.

-Two operator’s manuals and two service manuals.

-ANSI A92.2 data plate.

 

1) Dakota Service Body 108” Long x 40” High x 94” Wide:

-12 gauge tread plate floor with 6” structural channel frame

-40 in. compartment height, 20 in. compartment depth, 54 in. floor width.

-Stainless steel automotive rotary type door latches.

-Chain stops on all doors

-Rubber rolled crown type fenders

-Removable composite tailboard installed at rear.

-30” tread plate tail shelf with 7-lamp light bar installed.

-Master locking system.

-Curb side compartments as follows:-

1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers

Horizontal: Open

Rear Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers

-Street Side Compartments as follows:-

1st Vertical: Two (2) adjustable shelves with adjustable dividers on 4 inch centers

Horizontal: One (1) removable shelf with dividers on 6 inch centers

Rear Vertical: Five (5) fixed material hooks (1-3-1)

 

1) 2019 Ford F-450 4×2 cab and chassis.

-16,000 lb. GVWR.

-60” cab to axle.

-6.8L 3-valve SOHC EFI V10 gasoline engine

-TorqShift 6-speed automatic transmission.

-4.88 limited slip axle.

-Air conditioning.

-225/70R19.5G BSW AS tires.

-Trailer brake controller

-Snow plough prep package includes extra heavy duty suspension.

-Rear view camera and prep kit

-AM/FM radio.

-Painted Oxford White.

 

Installation to include the following:

-Install VERSALIFT SST-36-NE, mounting hardware, and belt drive system.

-Install rear torsion bar.

-Install and paint Dakota service body and accessories.

-Install ladder rack with hold down and locking feature.

-Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill

-Install Dimensions 1800 watt Pure Sine inverter with battery and box (curbside front compartment)

-Install combination pintle hitch with 2” ball, D rings and 7 prong trailer connector

-Install mud flaps, back up alarm and park brake interlock system.

-Furnish fire extinguisher, 3 piece triangle reflector kit and pair of rubber wheel chocks.

-Test ride completed unit for 1 hour.

-Test and certify per ANSI A92.2.